跳至主要内容

Hybrid cloud edge design

routerd's CloudEdge direction is to let one declarative router model cover the local edge and selected cloud-side facts without letting cloud automation edit the human-managed router file. The first implementation wave is intentionally only design documentation and Go type definitions. It introduces the API shapes for dynamic configuration, plugin I/O, and future hybrid resources; it does not wire controllers, the CLI, or dataplane renderers.

CloudEdge has two declarative pillars in this MVP:

  • L3 hybrid routing, where HybridRoute lowers remote IPv4 prefixes through an OverlayPeer.
  • Selective Address Mobility, where selected /32 IPv4 addresses are captured locally and delivered to the owning side over a routerd-to-routerd overlay without stretching L2.

The model extends the existing routerd architecture in Architecture overview: controllers still reconcile one desired configuration, resources still use the same apiVersion, kind, metadata.name, spec, and status shape, and the state database remains the runtime record for generated state.

Goals​

CloudEdge is aimed at mixed cloud and on-prem deployments where a router needs runtime intent from a trusted local source:

  • cloud inventory that changes faster than the startup YAML should change
  • selective address claims, route hints, or VPN attachment observations
  • provider actions that should be visible during plan/dry-run before operators decide whether to apply provider-side changes outside routerd
  • selective suppression of static fallback resources while a dynamic cloud resource is healthy

The MVP is conservative. Dynamic input can contribute resources and mask directives to the effective configuration, but it cannot mutate the startup file and routerd will not execute provider action plans.

Config layers​

CloudEdge introduces three explicit configuration layers.

startup-config​

The startup-config is the human-managed YAML loaded from the normal routerd configuration path, usually /usr/local/etc/routerd/router.yaml. Operators should keep it in git, review it like source code, and apply it through the existing validate, plan, dry-run, and apply flow.

Plugins must never edit startup-config. A plugin can observe the startup hash and emit dynamic intent, but it cannot rewrite, reorder, or remove resources in the source file. Static fallback routes, emergency management access, and other operator-owned safety resources belong here.

dynamic-config​

Dynamic-config is runtime intent produced by trusted local sources. In the MVP the primary source is a local plugin installed under the platform plugin directory, for example:

/usr/local/libexec/routerd/plugins/<name>/

Each plugin result is validated and stored as a DynamicConfigPart in the state database. A part has a source, generation, observedAt timestamp, expiresAt timestamp, digest, and resources/directives. Plugins return a TTL in their PluginResult; routerd resolves that duration into the stored expiresAt for the part. Expired parts are ignored when deriving effective-config.

Dynamic-config is not host state and is not an imperative command queue. It is runtime desired intent that participates in the same resource model as the startup configuration.

effective-config​

Effective-config is the only reconcile target:

effective-config = startup-config + active dynamic parts - active masks

Controllers, renderers, dry-run, plan, status, and future CloudEdge surfaces should reason about effective-config. Startup resources suppressed by active masks are not deleted from the startup file; they are omitted from the active reconcile set and reported as suppressed with enough metadata to explain why.

Design principles​

  • Startup-config is immutable from routerd plugins. Operators own it.
  • Dynamic-config is runtime intent, not a direct OS mutation path.
  • Effective-config is the only reconcile target.
  • Dynamic resources never overwrite startup resources in place.
  • Masks suppress matching startup resources; they do not delete them.
  • Every dynamic change must be explainable by source, generation, digest, observed time, expiry time, and directive reason.
  • Plugin output is always validated before it becomes dynamic-config.
  • Provider action plans are dry-run and display only in the MVP.

MVP scope​

In scope for the CloudEdge MVP foundation:

  • config.routerd.net/v1alpha1 type definitions for DynamicConfigPart and DynamicOverridePolicy
  • hybrid.routerd.net/v1alpha1 OverlayPeer, HybridRoute, AddressMobilityDomain, CloudProviderProfile, and RemoteAddressClaim resource shapes
  • plugin.routerd.net/v1alpha1 request/result contract types
  • documentation for layering, merge behavior, plugin I/O, policy, and future operator commands

Out of scope for this PR:

  • live address capture or forwarding dataplane behavior
  • controllers or reconcile-loop integration
  • CLI commands
  • plugin process execution
  • state database persistence
  • schema generation changes
  • remote plugin install, remote plugin registry, or remote provider execution

L3 hybrid routing​

HybridRoute is the conservative L3 pillar. It represents non-default remote IPv4 prefixes that should be lowered through an OverlayPeer. The lowering and status path is intentionally explicit: default routes are rejected, and operators can review the generated route intent through the normal routerd plan and dry-run flow.

Selective Address Mobility​

Selective Address Mobility is the second CloudEdge pillar. It is not full L2 extension. Public cloud fabrics do not expose an operator-controlled Ethernet segment, and provider address ownership models differ. routerd therefore models only selected mobile /32 IPv4 addresses:

  • AddressMobilityDomain defines the IPv4 prefix and requires mode: selective-address.
  • CloudProviderProfile describes a provider and its declared capabilities; it does not call provider APIs.
  • RemoteAddressClaim declares one /32, its owner side, a capture mechanism, and route delivery over an OverlayPeer.

The MVP layer is declarative only. No controller assigns secondary cloud IPs, enables proxy ARP, installs /32 forwarding routes, toggles ip_forward, or programs netlink for these resources. Live capture and forwarding are a later dataplane step.

Selective Address Mobility lives in the ordinary switching/forwarding plane and contains no firewall or NAT concept. Source and destination transparency is intrinsic, not a configurable field. Operators compose firewall and NAT policy separately by referencing literal addresses in existing FirewallZone, FirewallRule, or NAT44Rule resources.

See Selective Address Mobility for the resource model and provider capability framing.

Observe-only cloud inventory​

Cloud inventory plugins can observe provider state and return dynamic resources without mutating the provider. The example oci-inventory plugin emits a static RemoteAddressClaim candidate plus an OCI-style actionPlan that describes how a secondary private IP could be assigned outside routerd.

RemoteAddressClaim is declarative and dry-run/plan only in this MVP. It records the mobility domain, /32 address, owner side, capture metadata such as a provider secondary IP or proxy-ARP interface, and the route delivery hint for an overlay peer. routerd validates and displays the resource as dynamic-config, but no controller calls a cloud API, assigns a secondary IP, or mutates host networking for this kind.

Provider actionPlans stay display-only. They are useful for dry-run review and operator handoff, but they are not an imperative queue and routerd never executes them.

Roadmap​

Future PRs can add live capture and forwarding for Selective Address Mobility, route advertisements, VPN attachment observations, and provider inventory snapshots. These resources should remain normal effective-config resources after validation, so existing route, firewall, NAT, and observability flows can consume them without a separate cloud control path.

Full L2 extension remains out of scope. VXLAN, EVPN, VRF, WireGuard, and IPsec groundwork already exists, but CloudEdge should prefer L3 reachability and explicit per-address mobility before bridging remote fault domains. Any full L2 design needs a separate safety discussion covering loop avoidance, failure isolation, MTU, broadcast containment, and operational rollback.

See also Dynamic config reference and Plugin protocol.